Naval Brass Pipe

Naval Brass C46400 is nominally composed of 60% copper, 39.2% zinc and 0.8% tin. As is typical of brass alloys with the duplex alpha + beta structure, C46400 has good strength and rigidity. By substituting tin for an equal quantity of zinc, a high corrosion resistance to seawater is achieved. The addition of tin also gives the alloy an inherent resistance to dezincification, thereby further inhibiting the impingement by seawater at higher than normal temperatures. The alloy is also noted for its resistance to wear, fatigue, galling, and stress corrosion cracking.

Typical Applications:

BUILDERS HARDWARE : Lock Pins
ELECTRICAL : Precision Shipboard Equipment
FASTENERS : Rivets, Bolts, Nuts
INDUSTRIAL : Welding Rod, Condenser Plates, Structural Uses, Valve Stems, Balls, Heat Exchanger Tube, Aircraft Turn Buckle Barrels, Bearings, Dies, Golf Ball Production, Pressure Vessels, Bearings, Bushings, Hub Cones
MARINE : Properller Shafts, Marine Hardware, Decorative Fittings, Shafting, Propeller Shafts, Turn buckles
ORDINANCE : Missle Components
OTHER : Baffle Plates and Flanges
PLUMBING : Fittings

Equivalent Specifications

SPECIFICATIONS	DESIGNATION
ISO	CuZn38Sn1
Europen	CuZn39Sn1
BS	CZ 133
JIS	C 4640
Russian	L060-1

Chemical Composition

	Cu	Fe	Pb	Sn	Zn
Min/Max	59.0 - 62.0	0.1	0.2	0.5 - 1.0	Rem
Nominals	60.0000	-	-	0.7000	39.2000

Physical Properties

Coefficient of Thermal Expansion	11.8 10⁻⁶Per °F (68-572 F)
Density	0.304 lb/in3 @ 68 F
Electrical Conductivity	26 %IACS @ 68 F
Electrical Resistivity	39.9 ohms-cmil/ft @ 68 F
Melting Point Liquid US	1650 F
Melting Point Solid US	1630 F
Modulas of Elasticity in Tension	15000 ksi
Modulas of Rigidity	5600 ksi
Specific Gravity	8.41
Specific Heat Capacity	0.09 Btu/lb/°F @ 68 F
Thermal Conductivity	67.0 BTU in/hr.ft².°F @ 68 F

Sizes Available

HOLLOW RODS	Min Bore Size 20 mm and Max OD 100 mm
ROUND RODS/RODS	6mm To 130 mm
HEX	5mm To 60mm
SQUARE	4mm To 60mm
FLAT	5mm Min Thickness and max Width 120mm
PROFILES / SECTIONS	AS per Customer Drawing
BILLETS	Up to 200 mm
INGOTS	AS per Specification

Ask for Price

Excellent hot and cold workability; good forge ability. Fabricated by bending, coining, coppersmith, drawing and upsetting, hot forging and pressing, knurling, roll threading, shearing, spinning, swaging, and stamping.

Typical Applications:

Marine hardware, screw machine products, valve stems.
Common Fabrication Processes
Hot forging, pressing and machining

Equivalent Specifications

SPECIFICATIONS	DESIGNATION
ISO	CuZn37pb1Sn1
Europen	CuZn37pb1Sn1

Chemical Composition

	Cu	Fe	Pb	Sn	Zn
Min/Max	59.0 - 62.0	0.1	0.40-1.0	0.5 - 1.0	Rem
Nominals	60.0000	-	0.7	0.8	38.0

Physical Properties

Melting Point - Liquidus°F	1650
Melting Point - Solidus°F	1630
Densitylb/cu in. at 68°F	0.305
Specific Gravity	8.44
Electrical Conductivity% IACS at 68°F	26
Thermal ConductivityBtu/ sq ft/ ft hr/ °F at 68°F	67
Coefficient of Thermal Expansion 68-572 10⁻⁶Per °F (68-572 F)	11.8
Specific Heat CapacityBtu/lb/°F at 68°F	0.09
Modulus of Elasticity in Tensionksi	15000
Modulus of Rigidityksi	5600

Sizes Available

HOLLOW RODS	Min Bore Size 20 mm and Max OD 100 mm
ROUND RODS/RODS	6mm To 130 mm
HEX	5mm To 60mm
SQUARE	4mm To 60mm
FLAT	5mm Min Thickness and max Width 120mm
PROFILES / SECTIONS	AS per Customer Drawing
BILLETS	Up to 200 mm
INGOTS	AS per Specification

Ask for Price

High ductility, high electrical and thermal conductivity, high impact strength, good creep resistance, ease of welding, and low volatility under high vacuum.

Typical Applications:

FASTENERS: Fasteners:Abhilash Enterprises
INDUSTRIAL: Valve Stems, Light Bearings, Gears, Screw Machine Parts:3
MARINE: Marine Hardware, Seawater Valve Stems:ISO 13485:2016, WHO-GMP, Compliance Certificate

Equivalent Specifications

SPECIFICATIONS	DESIGNATION
Europen	CuZn36Pb2Sn1
BS	CZ 134

Chemical Composition

	Cu	Fe	Pb	Sn	Zn
Min/Max	59.0 - 62.0	0.1	1.3 - 2.2	0.5 - 1.0	Rem
Nominals	60.5000	-	1.8000	0.7000	37.5000

Physical Properties

Coefficient of Thermal Expansion	11.8 10⁻⁶Per °F (68-572 F)
Density	0.305 lb/in3 @ 68 F
Electrical Conductivity	26 %IACS @ 68 F
Electrical Resistivity	39.9 ohms-cmil/ft @ 68 F
Melting Point Liquid US	1650 F
Melting Point Solid US	1630 F
Modulas of Elasticity in Tension	15000 ksi
Modulas of Rigidity	5600 ksi
Specific Gravity	8.44
Specific Heat Capacity	0.09 Btu/lb/°F @ 68 F
Thermal Conductivity	67.0 BTU in/hr.ft².°F @ 68 F

Sizes Available

HOLLOW RODS	Min Bore Size 20 mm and Max OD 100 mm
ROUND RODS/RODS	6mm To 130 mm
HEX	5mm To 60mm
SQUARE	4mm To 60mm
FLAT	5mm Min Thickness and max Width 120mm
PROFILES / SECTIONS	AS per Customer Drawing
BILLETS	Up to 200 mm
INGOTS	AS per Specification

Ask for Price

Excellent hot and cold workability; good forge ability. Fabricated by bending, coining, coppersmith, drawing and upsetting, hot forging and pressing, knurling, roll threading, shearing, spinning, swaging, and stamping.

Typical Applications:

Marine hardware, screw machine products, valve stems.
Common Fabrication Processes
Hot forging, pressing and machining

Equivalent Specifications

SPECIFICATIONS	DESIGNATION
ISO	CuZn37pb1Sn1
Europen	CuZn37pb1Sn1

Chemical Composition

	Cu	Fe	Pb	Sn	Zn
Min/Max	59.0 - 62.0	0.1	0.40-1.0	0.5 - 1.0	Rem
Nominals	60.0000	-	0.7	0.8	38.0

Physical Properties

Melting Point - Liquidus°F	1650
Melting Point - Solidus°F	1630
Densitylb/cu in. at 68°F	0.305
Specific Gravity	8.44
Electrical Conductivity% IACS at 68°F	26
Thermal ConductivityBtu/ sq ft/ ft hr/ °F at 68°F	67
Coefficient of Thermal Expansion 68-572 10⁻⁶Per °F (68-572 F)	11.8
Specific Heat CapacityBtu/lb/°F at 68°F	0.09
Modulus of Elasticity in Tensionksi	15000
Modulus of Rigidityksi	5600

Sizes Available

HOLLOW RODS	Min Bore Size 20 mm and Max OD 100 mm
ROUND RODS/RODS	6mm To 130 mm
HEX	5mm To 60mm
SQUARE	4mm To 60mm
FLAT	5mm Min Thickness and max Width 120mm
PROFILES / SECTIONS	AS per Customer Drawing
BILLETS	Up to 200 mm
INGOTS	AS per Specification

Ask for Price

Excellent hot and cold workability; good forge ability. Fabricated by bending, coining, coppersmith, drawing and upsetting, hot forging and pressing, knurling, roll threading, shearing, spinning, swaging, and stamping.

Typical Applications:

Marine hardware, screw machine products, valve stems.
Common Fabrication Processes
Hot forging, pressing and machining

Equivalent Specifications

SPECIFICATIONS	DESIGNATION
ISO	CuZn37pb1Sn1
Europen	CuZn37pb1Sn1

Chemical Composition

	Cu	Fe	Pb	Sn	Zn
Min/Max	59.0 - 62.0	0.1	0.40-1.0	0.5 - 1.0	Rem
Nominals	60.5000	-	0.7	0.8	38.0

Physical Properties

Melting Point - Liquidus°F	1650
Melting Point - Solidus°F	1630
Densitylb/cu in. at 68°F	0.305
Specific Gravity	8.44
Electrical Conductivity% IACS at 68°F	26
Thermal ConductivityBtu/ sq ft/ ft hr/ °F at 68°F	67
Coefficient of Thermal Expansion 68-572 10⁻⁶Per °F (68-572 F)	11.8
Specific Heat CapacityBtu/lb/°F at 68°F	0.09
Modulus of Elasticity in Tensionksi	15000
Modulus of Rigidityksi	5600

Sizes Available

HOLLOW RODS	Min Bore Size 20 mm and Max OD 100 mm
ROUND RODS/RODS	6mm To 130 mm
HEX	5mm To 60mm
SQUARE	4mm To 60mm
FLAT	5mm Min Thickness and max Width 120mm
PROFILES / SECTIONS	AS per Customer Drawing
BILLETS	Up to 200 mm
INGOTS	AS per Specification

Ask for Price

Excellent hot and cold workability; good forge ability. Fabricated by bending, coining, coppersmith, drawing and upsetting, hot forging and pressing, knurling, roll threading, shearing, spinning, swaging, and stamping.

Typical Applications:

Marine hardware, screw machine products, valve stems
Common Fabrication Processes
Hot forging, pressing and machining

Equivalent Specifications

SPECIFICATIONS	DESIGNATION
ISO	CuZn37pb1Sn1
Europen	CuZn37pb1Sn1

Chemical Composition

	Cu	Fe	Pb	Sn	Zn
Min/Max	59.0 - 62.0	0.1	0.40-1.0	0.5 - 1.0	Rem
Nominals	60.5000	-	0.7	0.8	38

Physical Properties

Melting Point - Liquidus°F	1650
Melting Point - Solidus°F	1630
Densitylb/cu in. at 68°F	0.305
Specific Gravity	8.44
Electrical Conductivity% IACS at 68°F	26
Thermal ConductivityBtu/ sq ft/ ft hr/ °F at 68°F	67
Coefficient of Thermal Expansion 68-572 10⁻⁶Per °F (68-572 F)	11.8
Specific Heat CapacityBtu/lb/°F at 68°F	0.09
Modulus of Elasticity in Tensionksi	15000
Modulus of Rigidityksi	5600

Sizes Available

HOLLOW RODS	Min Bore Size 20 mm and Max OD 100 mm
ROUND RODS/RODS	6mm To 130 mm
HEX	5mm To 60mm
SQUARE	4mm To 60mm
FLAT	5mm Min Thickness and max Width 120mm
PROFILES / SECTIONS	AS per Customer Drawing
BILLETS	Up to 200 mm
INGOTS	AS per Specification

Ask for Price

Excellent hot and cold workability; good forge ability. Fabricated by bending, coining, coppersmith, drawing and upsetting, hot forging and pressing, knurling, roll threading, shearing, spinning, swaging, and stamping.

Typical Applications:

Marine hardware, screw machine products, valve stems
Common Fabrication Processes
Hot forging, pressing and machining

Equivalent Specifications

SPECIFICATIONS	DESIGNATION
ISO	CuZn37pb1Sn1
Europen	CuZn37pb1Sn1

Chemical Composition

	Cu	Fe	Pb	Sn	Zn
Min/Max	59.0 - 62.0	0.1	0.40-1.0	0.5 - 1.0	Rem
Nominals	60.5000	-	0.7	0.8	38

Physical Properties

Melting Point - Liquidus°F	1650
Melting Point - Solidus°F	1630
Densitylb/cu in. at 68°F	0.305
Specific Gravity	8.44
Electrical Conductivity% IACS at 68°F	26
Thermal ConductivityBtu/ sq ft/ ft hr/ °F at 68°F	67
Coefficient of Thermal Expansion 68-572 10⁻⁶Per °F (68-572 F)	11.8
Specific Heat CapacityBtu/lb/°F at 68°F	0.09
Modulus of Elasticity in Tensionksi	15000
Modulus of Rigidityksi	5600

Sizes Available

HOLLOW RODS	Min Bore Size 20 mm and Max OD 100 mm
ROUND RODS/RODS	6mm To 130 mm
HEX	5mm To 60mm
SQUARE	4mm To 60mm
FLAT	5mm Min Thickness and max Width 120mm
PROFILES / SECTIONS	AS per Customer Drawing
BILLETS	Up to 200 mm
INGOTS	AS per Specification

Ask for Price

Excellent hot and cold workability; good forge ability. Fabricated by bending, coining, coppersmith, drawing and upsetting, hot forging and pressing, knurling, roll threading, shearing, spinning, swaging, and stamping.

Typical Applications:

Marine hardware, screw machine products, valve stems
Common Fabrication Processes
Hot forging, pressing and machining

Equivalent Specifications

SPECIFICATIONS	DESIGNATION
ISO	CuZn37pb1Sn1
Europen	CuZn37pb1Sn1

Chemical Composition

	Cu	Fe	Pb	Sn	Zn
Min/Max	59.0 - 62.0	0.1	0.40-1.0	0.5 - 1.0	Rem
Nominals	60.5000	-	0.7	0.8	38.0

Physical Properties

Melting Point - Liquidus°F	1650
Melting Point - Solidus°F	1630
Densitylb/cu in. at 68°F	0.305
Specific Gravity	8.44
Electrical Conductivity% IACS at 68°F	26
Thermal ConductivityBtu/ sq ft/ ft hr/ °F at 68°F	67
Coefficient of Thermal Expansion 68-572 10⁻⁶Per °F (68-572 F)	11.8
Specific Heat CapacityBtu/lb/°F at 68°F	0.09
Modulus of Elasticity in Tensionksi	15000
Modulus of Rigidityksi	5600

Sizes Available

HOLLOW RODS	Min Bore Size 20 mm and Max OD 100 mm
ROUND RODS/RODS	6mm To 130 mm
HEX	5mm To 60mm
SQUARE	4mm To 60mm
FLAT	5mm Min Thickness and max Width 120mm
PROFILES / SECTIONS	AS per Customer Drawing
BILLETS	Up to 200 mm
INGOTS	AS per Specification

CATEGORY	ASTM	BS	EN	JIS	DIN	ISO	IS
Naval Brass	C46200	CZ112		H3100(92)C4621 P			IS 291 Grade 1
Naval Brass	C46400	CZ114	CW719R	H3100(92)C4640 BE	2.053	1634-CuZn38Sn1
Naval Brass	C48200		CW714R		CuZn37Pb1Sn1	426-1 CuZn37pb1Sn1	IS 291 Grade 2
Naval Brass	C48500	CZ134	CW711R		2.0371	CuZn39Pb2Sn

C46400 Naval Brass Pipe

C48200 Naval Brass Pipe

C48500 Naval Brass Pipe

CW719R Naval Brass Pipe

CZ134 Naval Brass Pipe

CZ114 Naval Brass Pipe

CZ112 Naval Brass Pipe

CUZN37PB1SN1 Naval Brass