Metal Alloys Corporation
Engineers India Limited Engineers India Limited Metal Alloys Corporation {short description of image}

ISO
Home About us Products Our Special Product Manufacturing Process Alloys Range Industrial Application Media Gallery Contact us
Metal Alloys CorporationMetal Alloys CorporationMetal Alloys CorporationMetal Alloys CorporationMetal Alloys CorporationMetal Alloys CorporationMetal Alloys Corporation

Metal Alloys Corporation

Product Range

 

Metal Alloys Corporation

Home » Leaded Commercial Bronze Hollow Bar Rod
CATEGORY
ASTM BS EN JIS DIN ISO IS
Low Leaded Nickel Copper C19140 CuNiPbP
Leaded Commercial Bronze C31400 CuZn9Pb2

Leaded Commercial Bronze Hollow Bar Rod

C19140 Low Leaded Commercial Bronze Hollow Bar Rod

C19140 is unique precipitation hardening alloys containing copper, lead, nickel and phosphorus. The nickel and phosphorus in the alloy combine to form nickel phosphate, which dissolves in the copper on heating to a suitable temperature, and can be retained by quenching. Subsequent aging will precipitate the nickel phosphate from solid solution in a highly dispersed manner thereby creating a remarkable hardening and strengthening effect with excellent stress relaxation properties. Subsequent cold working increases the strength still further.

Typical Applications:
  • ELECTRICAL: Contacts, Sockets, Connector Pins

Equivalent Specifications
SPECIFICATIONSDESIGNATION
ISOCuNi30Mn1Fe
EuropenCuNi30Mn1Fe
BSCN 107
JISC 7150
RussianMNZMo30-1-1

Chemical Composition
CuFePbNiPSnZn
Min/MaxRem..05.40 - .8.8 - 1.2.15 - .35.05.50
Nominals98.2-.61.0.20--

Physical Properties
Melting Point - Liquidus1980 F
Melting Point - Solidus1900 F
Density0.320 lb/inĂ‚Â³ at 68 F
Specific Gravity8.880
Electrical Conductivity55 %IACS @ 68 F
Thermal Conductivity146 BTU in/hr.ft2.°F @ 68 F
Modulas of Elasticity in Tension18000 ksi
Modulus of Rigidity6000 ksi

Sizes Available
HOLLOW RODSMin Bore Size 20 mm and Max OD 100 mm
ROUND RODS/RODS8mm To 100 mm
HEX10mm To 60mm
SQUARE10mm To 60mm
FLAT10mm Min Thickness and max Width 120mm
BILLETSUp to 200 mm
INGOTSAS per Specification


Yes! I am Interested


CATEGORY
ASTM BS EN JIS DIN ISO IS
Leaded Nickel Copper C19160 CuNi1Pb1P

C19160 Leaded Nickel Copper Hollow Bar Rod

C19160 alloy is a free-cutting bronze alloy developed for the manufacture of connectors, primarily in the electronics industry. This high machinable alloy must meet several requirements such as high strength, high electrical conductivity, and excellent corrosion resistance.

Typical Applications:
  • ELECTRICAL: Contacts, Sockets, Connector Pins

Equivalent Specifications
SPECIFICATIONSDESIGNATION
ISOCuNi30Mn1Fe
EuropenCuNi30Mn1Fe
BSCN 107
JISC 7150
RussianMNZMo30-1-1

Chemical Composition
CuFePbNiPSnZn
Min/MaxRem..05.8 - 1.2.8 - 1.2.15 - .35.05.50
Nominals97.8-1.01.0.2--

Physical Properties
Melting Point - Liquidus1980 F
Melting Point - Solidus1900 F
Density0.320 lb/inĂ‚Â³ at 68 F
Specific Gravity8.880
Electrical Conductivity55 %IACS @ 68 F
Thermal Conductivity146 BTU in/hr.ft2.°F @ 68 F
Modulas of Elasticity in Tension18000 ksi
Modulus of Rigidity6000 ksi

Sizes Available
HOLLOW RODSMin Bore Size 20 mm and Max OD 100 mm
ROUND RODS/RODS8mm To 100 mm
HEX10mm To 60mm
SQUARE10mm To 60mm
FLAT10mm Min Thickness and max Width 120mm
BILLETSUp to 200 mm
INGOTSAS per Specification


Yes! I am Interested


C31400 Leaded Commercial Bronze Hollow Bar Rod

Leaded Commercial Bronze C31400 combines the natural corrosion resistance of C22000 with the machinability typical of leaded brasses. Like C22000, it is an alpha brass nominally composed of 89% copper and 9% zinc, but it also contains approximately 2% lead to impart free-cutting characteristics. The relatively low zinc content of C31400 provides excellent corrosion resistance in potable water along with a pleasing golden color that matches C22000 hardware. Alloy C31400 is also suitable for outdoor use due to its resistance to stress corrosion cracking and to corrosion in general, but where the highest strength is not required.

Typical Applications:
  • BUILDERS HARDWARE: Door Knobs
  • ELECTRICAL: Connectors for Wire and Cable, Electrical Plug Type Connectors
  • FASTENERS: Screws, Nuts INDUSTRIAL: Pickling Fixtures, Pickling Racks, Pickling Crates, Screw Machine Parts

Equivalent Specifications
SPECIFICATIONSDESIGNATION
ISOCuNi30Mn1Fe
EuropenCuNi30Mn1Fe
BSCN 107
JISC 7150
RussianMNZMo30-1-1

Chemical Composition
CuFePbNiZn
Min/Max87.5 - 90.5.011.3 - 2.50.7Rem
Nominals89.0000-1.9000-9.1000

Physical Properties
Product PropertyUS Customary
Coefficient of Thermal Expansion10.2 10−6Per °F (68-572 F)
Density0.319 lb/in3 @ 68 F
Electrical Conductivity42 %IACS @ 68 F
Electrical Resistivity24.7 ohms-cmil/ft @ 68 F
Melting Point Liquid US1900 F
Melting Point Solid US1850 F
Modulas of Elasticity in Tension17000 ksi
Modulas of Rigidity6400 ksi
Specific Gravity8.83
Specific Heat Capacity0.09 Btu/lb/°F @ 68 F
Thermal Conductivity10.4 BTU in/hr.ft2.°F @ 68°F

Sizes Available
HOLLOW RODSMin Bore Size 20 mm and Max OD 100 mm
ROUND RODS/RODS6mm To 130 mm
HEX5mm To 60mm
SQUARE4mm To 60mm
FLAT5mm Min Thickness and max Width 120mm
PROFILES / SECTIONSS per Customer Drawing
BILLETSUp to 200 mm
INGOTSAS per Specification


Yes! I am Interested


CATEGORY
ASTM BS EN JIS DIN ISO IS
Nickel Leaded Commercial C31600

C31600 Leaded Commercial Bronze Hollow Bar Rod

Nickel Bearing C31600 is composed of approximately 89% copper, 8% zinc, and 2% lead, but also contains 1% nickel. This alloy combines the natural corrosion resistance and machinability of C31400 with a higher tensile and yield strength resulting from the controlled addition of nickel. The relatively low zinc content provides excellent corrosion resistance in potable water along with a pleasing golden color that matches C22000 hardware. It also possesses a particular resistance to stress corrosion cracking. It is an alloy suitable for outdoor use where higher strength is required.

Typical Applications:
  • BUILDERS HARDWARE: Hardware
  • ELECTRICAL: Connectors
  • FASTENERS: Fasteners, Nuts, Screws
  • INDUSTRIAL: Screw Machine Parts

Equivalent Specifications
SPECIFICATIONSDESIGNATION
ISOCuNi30Mn1Fe
EuropenCuNi30Mn1Fe
BSCN 107
JISC 7150
RussianMNZMo30-1-1

Chemical Composition
CuFePbSnZn
Min/Max87.5 - 90.50.11.3 - 2.50.7 - 1.20.04 - 0.1Rem
Nominals89.0000-1.90001.00000.70008.1000

Physical Properties
Product PropertyUS Customary
Coefficient of Thermal Expansion10.2 10−6Per °F (68-572 F)
Density0.32 lb/in3 @ 68 F
Electrical Conductivity32 %IACS @ 68 F
Electrical Resistivity32.4 ohms-cmil/ft @ 68 F
Melting Point Liquid US1900 F
Melting Point Solid US1850 F
Modulas of Elasticity in Tension17000 ksi
Modulas of Rigidity6400 ksi
Specific Gravity8.83
Specific Heat Capacity0.09 Btu/lb/°F @ 68 F
Thermal Conductivity81.0 BTU in/hr.ft2.°F @ 68 F

Sizes Available
HOLLOW RODSMin Bore Size 20 mm and Max OD 100 mm
ROUND RODS/RODS6mm To 130 mm
HEX5mm To 60mm
SQUARE4mm To 60mm
FLAT5mm Min Thickness and max Width 120mm
PROFILES / SECTIONSS per Customer Drawing
BILLETSUp to 200 mm
INGOTSAS per Specification


Yes! I am Interested


Home  |  About us  |  Products  |  Our Special Product  |  Manufacturing Process  |  Alloys Range  |  Industrial Application  |  Media Gallery  |  Contact Us  |  Send Enquiry

Member INDIAMART© Metal Alloys Corporation. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited