Medical Gas Copper Pipe

At Metal Alloys Corporation we proudly manufacture MEDIFLOW BY METALCO marked Medical Grade Copper Pipes used in Medical Gas Distribution system. Uninterrupted Medical Gas supply is a necessity in hospitals (ICCU, Operation Theater, Wards, Nursery etc). Pipes facilitate this in most effective manner.

MEDIFLOW BY METALCO marked medical grade copper tubes are manufactured as per EN13348 / BS EN 1057 specifications. The pipes are manufactured under thorough inspections and quality control measures.

MEDIFLOW BY METALCO marked medical grade copper tubes are available in size range 10mm to 108mm OD, 0.6mm to 2.0mm wall thickness in Half Hard/Hard conditions and Length 3 meter as per requirement.

MEDIFLOW BY METALCO Pipes are subjected to Third Party Inspection agencies like Lloyds, SGS, TUV as per customer demand mandatory specifications and MEDIFLOW BY METALCO.

Equivalent Specifications

Particular		Standard			METALCO
CHEMICAL COMPOSITION		Copper (Cu) + Silver (Ag)		99.90%	Spectro Analysis done per heat as per standard tolerances.
CHEMICAL COMPOSITION		Phosphorous		0.015% to 0.04%	Spectro Analysis done per heat as per standard tolerances.
CARBON CONTENT TEST		Determining lubricant residue as total Carbon Content by measuring Carbon Dioxide Generated.			Tested with Combustion Method as per EN723:2009
CARBON CONTENT TEST					Tested with Combustion Method as per EN723:2009
TENSILE/ELONGATION TEST
Temper		Tensile Strength	Elongation	Hardness (Indicative)
As per EN1773	Common Term	MPa min.	A % min	HV 5
R220	annealed	220	40	(40 to 75)	Specifications maintained with help of In house testing facility.
R250	half hard	250	30	(75 to 100)
R290	hard	290	3	(min. 100)
DRIFTING TEST		Depending on Size and Temper Mandatory/Agreed Terms			Conical Mandrel @ 45º with tube end expanding 30º
FREE FROM DEFECT TEST		Eddy Current Test for detection of local defects			EDDY Current Test Conducted in accordance with EN1971
CLEANLINESS REQUIREMENT		Degreased, End Caps			Degreasing and End caps are fixed at both end of the pipe.

Ask for Price

At Metal Alloys Corporation we proudly manufacture MEDIFLOW BY METALCO marked Medical Grade Copper Pipes used in Medical Gas Distribution system. Uninterrupted Medical Gas supply is a necessity in hospitals (ICCU, Operation Theater, Wards, Nursery etc). Pipes facilitate this in most effective manner.

MEDIFLOW BY METALCO marked medical grade copper tubes are manufactured as per EN13348 / BS EN 1057 specifications. The pipes are manufactured under thorough inspections and quality control measures.

MEDIFLOW BY METALCO marked medical grade copper tubes are available in size range 10mm to 108mm OD, 0.6mm to 2.0mm wall thickness in Half Hard/Hard conditions and Length 3 meter as per requirement.

MEDIFLOW BY METALCO Pipes are subjected to Third Party Inspection agencies like Lloyds, SGS, TUV as per customer demand mandatory specifications and MEDIFLOW BY METALCO.

Equivalent Specifications

Particular		Standard			METALCO
CHEMICAL COMPOSITION		Copper (Cu) + Silver (Ag)		99.90%	Spectro Analysis done per heat as per standard tolerances.
CHEMICAL COMPOSITION		Phosphorous		0.015% to 0.04%	Spectro Analysis done per heat as per standard tolerances.
CARBON CONTENT TEST		Determining lubricant residue as total Carbon Content by measuring Carbon Dioxide Generated.			Tested with Combustion Method as per EN723:2009
CARBON CONTENT TEST					Tested with Combustion Method as per EN723:2009
TENSILE/ELONGATION TEST
Temper		Tensile Strength	Elongation	Hardness (Indicative)
As per EN1773	Common Term	MPa min.	A % min	HV 5
R220	annealed	220	40	(40 to 75)	Specifications maintained with help of In house testing facility.
R250	half hard	250	30	(75 to 100)
R290	hard	290	3	(min. 100)
DRIFTING TEST		Depending on Size and Temper Mandatory/Agreed Terms			Conical Mandrel @ 45º with tube end expanding 30º
FREE FROM DEFECT TEST		Eddy Current Test for detection of local defects			EDDY Current Test Conducted in accordance with EN1971
CLEANLINESS REQUIREMENT		Degreased, End Caps			Degreasing and End caps are fixed at both end of the pipe.

Ask for Price

At Metal Alloys Corporation we proudly manufacture MEDIFLOW BY METALCO marked Medical Grade Copper Pipes used in Medical Gas Distribution system. Uninterrupted Medical Gas supply is a necessity in hospitals (ICCU, Operation Theater, Wards, Nursery etc). Pipes facilitate this in most effective manner.

MEDIFLOW BY METALCO marked medical grade copper tubes are manufactured as per EN13348 / BS EN 1057 specifications. The pipes are manufactured under thorough inspections and quality control measures.

MEDIFLOW BY METALCO marked medical grade copper tubes are available in size range 10mm to 108mm OD, 0.6mm to 2.0mm wall thickness in Half Hard/Hard conditions and Length 3 meter as per requirement.

MEDIFLOW BY METALCO Pipes are subjected to Third Party Inspection agencies like Lloyds, SGS, TUV as per customer demand mandatory specifications and MEDIFLOW BY METALCO.

Equivalent Specifications

Particular		Standard			METALCO
CHEMICAL COMPOSITION		Copper (Cu) + Silver (Ag)		99.90%	Spectro Analysis done per heat as per standard tolerances.
CHEMICAL COMPOSITION		Phosphorous		0.015% to 0.04%	Spectro Analysis done per heat as per standard tolerances.
CARBON CONTENT TEST		Determining lubricant residue as total Carbon Content by measuring Carbon Dioxide Generated.			Tested with Combustion Method as per EN723:2009
CARBON CONTENT TEST					Tested with Combustion Method as per EN723:2009
TENSILE/ELONGATION TEST
Temper		Tensile Strength	Elongation	Hardness (Indicative)
As per EN1773	Common Term	MPa min.	A % min	HV 5
R220	annealed	220	40	(40 to 75)	Specifications maintained with help of In house testing facility.
R250	half hard	250	30	(75 to 100)
R290	hard	290	3	(min. 100)
DRIFTING TEST		Depending on Size and Temper Mandatory/Agreed Terms			Conical Mandrel @ 45º with tube end expanding 30º
FREE FROM DEFECT TEST		Eddy Current Test for detection of local defects			EDDY Current Test Conducted in accordance with EN1971
CLEANLINESS REQUIREMENT		Degreased, End Caps			Degreasing and End caps are fixed at both end of the pipe.

Ask for Price

At Metal Alloys Corporation we proudly manufacture MEDIFLOW BY METALCO marked Medical Grade Copper Pipes used in Medical Gas Distribution system. Uninterrupted Medical Gas supply is a necessity in hospitals (ICCU, Operation Theater, Wards, Nursery etc). Pipes facilitate this in most effective manner.

MEDIFLOW BY METALCO marked medical grade copper tubes are manufactured as per EN13348 / BS EN 1057 specifications. The pipes are manufactured under thorough inspections and quality control measures.

MEDIFLOW BY METALCO marked medical grade copper tubes are available in size range 10mm to 108mm OD, 0.6mm to 2.0mm wall thickness in Half Hard/Hard conditions and Length 3 meter as per requirement.

MEDIFLOW BY METALCO Pipes are subjected to Third Party Inspection agencies like Lloyds, SGS, TUV as per customer demand mandatory specifications and MEDIFLOW BY METALCO.

Equivalent Specifications

Particular		Standard			METALCO
CHEMICAL COMPOSITION		Copper (Cu) + Silver (Ag)		99.90%	Spectro Analysis done per heat as per standard tolerances.
CHEMICAL COMPOSITION		Phosphorous		0.015% to 0.04%	Spectro Analysis done per heat as per standard tolerances.
CARBON CONTENT TEST		Determining lubricant residue as total Carbon Content by measuring Carbon Dioxide Generated.			Tested with Combustion Method as per EN723:2009
CARBON CONTENT TEST					Tested with Combustion Method as per EN723:2009
TENSILE/ELONGATION TEST
Temper		Tensile Strength	Elongation	Hardness (Indicative)
As per EN1773	Common Term	MPa min.	A % min	HV 5
R220	annealed	220	40	(40 to 75)	Specifications maintained with help of In house testing facility.
R250	half hard	250	30	(75 to 100)
R290	hard	290	3	(min. 100)
DRIFTING TEST		Depending on Size and Temper Mandatory/Agreed Terms			Conical Mandrel @ 45º with tube end expanding 30º
FREE FROM DEFECT TEST		Eddy Current Test for detection of local defects			EDDY Current Test Conducted in accordance with EN1971
CLEANLINESS REQUIREMENT		Degreased, End Caps			Degreasing and End caps are fixed at both end of the pipe.

Ask for Price

At Metal Alloys Corporation we proudly manufacture MEDIFLOW BY METALCO marked Medical Grade Copper Pipes used in Medical Gas Distribution system. Uninterrupted Medical Gas supply is a necessity in hospitals (ICCU, Operation Theater, Wards, Nursery etc). Pipes facilitate this in most effective manner.

MEDIFLOW BY METALCO marked medical grade copper tubes are manufactured as per EN13348 / BS EN 1057 specifications. The pipes are manufactured under thorough inspections and quality control measures.

MEDIFLOW BY METALCO marked medical grade copper tubes are available in size range 10mm to 108mm OD, 0.6mm to 2.0mm wall thickness in Half Hard/Hard conditions and Length 3 meter as per requirement.

MEDIFLOW BY METALCO Pipes are subjected to Third Party Inspection agencies like Lloyds, SGS, TUV as per customer demand mandatory specifications and MEDIFLOW BY METALCO.

Equivalent Specifications

Particular		Standard			METALCO
CHEMICAL COMPOSITION		Copper (Cu) + Silver (Ag)		99.90%	Spectro Analysis done per heat as per standard tolerances.
CHEMICAL COMPOSITION		Phosphorous		0.015% to 0.04%	Spectro Analysis done per heat as per standard tolerances.
CARBON CONTENT TEST		Determining lubricant residue as total Carbon Content by measuring Carbon Dioxide Generated.			Tested with Combustion Method as per EN723:2009
CARBON CONTENT TEST					Tested with Combustion Method as per EN723:2009
TENSILE/ELONGATION TEST
Temper		Tensile Strength	Elongation	Hardness (Indicative)
As per EN1773	Common Term	MPa min.	A % min	HV 5
R220	annealed	220	40	(40 to 75)	Specifications maintained with help of In house testing facility.
R250	half hard	250	30	(75 to 100)
R290	hard	290	3	(min. 100)
DRIFTING TEST		Depending on Size and Temper Mandatory/Agreed Terms			Conical Mandrel @ 45º with tube end expanding 30º
FREE FROM DEFECT TEST		Eddy Current Test for detection of local defects			EDDY Current Test Conducted in accordance with EN1971
CLEANLINESS REQUIREMENT		Degreased, End Caps			Degreasing and End caps are fixed at both end of the pipe.

Ask for Price

At Metal Alloys Corporation we proudly manufacture MEDIFLOW BY METALCO marked Medical Grade Copper Pipes used in Medical Gas Distribution system. Uninterrupted Medical Gas supply is a necessity in hospitals (ICCU, Operation Theater, Wards, Nursery etc). Pipes facilitate this in most effective manner.

MEDIFLOW BY METALCO marked medical grade copper tubes are manufactured as per EN13348 / BS EN 1057 specifications. The pipes are manufactured under thorough inspections and quality control measures.

MEDIFLOW BY METALCO marked medical grade copper tubes are available in size range 10mm to 108mm OD, 0.6mm to 2.0mm wall thickness in Half Hard/Hard conditions and Length 3 meter as per requirement.

MEDIFLOW BY METALCO Pipes are subjected to Third Party Inspection agencies like Lloyds, SGS, TUV as per customer demand mandatory specifications and MEDIFLOW BY METALCO.

Equivalent Specifications

Particular		Standard			METALCO
CHEMICAL COMPOSITION		Copper (Cu) + Silver (Ag)		99.90%	Spectro Analysis done per heat as per standard tolerances.
CHEMICAL COMPOSITION		Phosphorous		0.015% to 0.04%	Spectro Analysis done per heat as per standard tolerances.
CARBON CONTENT TEST		Determining lubricant residue as total Carbon Content by measuring Carbon Dioxide Generated.			Tested with Combustion Method as per EN723:2009
CARBON CONTENT TEST					Tested with Combustion Method as per EN723:2009
TENSILE/ELONGATION TEST
Temper		Tensile Strength	Elongation	Hardness (Indicative)
As per EN1773	Common Term	MPa min.	A % min	HV 5
R220	annealed	220	40	(40 to 75)	Specifications maintained with help of In house testing facility.
R250	half hard	250	30	(75 to 100)
R290	hard	290	3	(min. 100)
DRIFTING TEST		Depending on Size and Temper Mandatory/Agreed Terms			Conical Mandrel @ 45º with tube end expanding 30º
FREE FROM DEFECT TEST		Eddy Current Test for detection of local defects			EDDY Current Test Conducted in accordance with EN1971
CLEANLINESS REQUIREMENT		Degreased, End Caps			Degreasing and End caps are fixed at both end of the pipe.

Ask for Price

At Metal Alloys Corporation we proudly manufacture MEDIFLOW BY METALCO marked Medical Grade Copper Pipes used in Medical Gas Distribution system. Uninterrupted Medical Gas supply is a necessity in hospitals (ICCU, Operation Theater, Wards, Nursery etc). Pipes facilitate this in most effective manner.

MEDIFLOW BY METALCO marked medical grade copper tubes are manufactured as per EN13348 / BS EN 1057 specifications. The pipes are manufactured under thorough inspections and quality control measures.

MEDIFLOW BY METALCO marked medical grade copper tubes are available in size range 10mm to 108mm OD, 0.6mm to 2.0mm wall thickness in Half Hard/Hard conditions and Length 3 meter as per requirement.

MEDIFLOW BY METALCO Pipes are subjected to Third Party Inspection agencies like Lloyds, SGS, TUV as per customer demand mandatory specifications and MEDIFLOW BY METALCO.

Equivalent Specifications

Particular		Standard			METALCO
CHEMICAL COMPOSITION		Copper (Cu) + Silver (Ag)		99.90%	Spectro Analysis done per heat as per standard tolerances.
CHEMICAL COMPOSITION		Phosphorous		0.015% to 0.04%	Spectro Analysis done per heat as per standard tolerances.
CARBON CONTENT TEST		Determining lubricant residue as total Carbon Content by measuring Carbon Dioxide Generated.			Tested with Combustion Method as per EN723:2009
CARBON CONTENT TEST					Tested with Combustion Method as per EN723:2009
TENSILE/ELONGATION TEST
Temper		Tensile Strength	Elongation	Hardness (Indicative)
As per EN1773	Common Term	MPa min.	A % min	HV 5
R220	annealed	220	40	(40 to 75)	Specifications maintained with help of In house testing facility.
R250	half hard	250	30	(75 to 100)
R290	hard	290	3	(min. 100)
DRIFTING TEST		Depending on Size and Temper Mandatory/Agreed Terms			Conical Mandrel @ 45º with tube end expanding 30º
FREE FROM DEFECT TEST		Eddy Current Test for detection of local defects			EDDY Current Test Conducted in accordance with EN1971
CLEANLINESS REQUIREMENT		Degreased, End Caps			Degreasing and End caps are fixed at both end of the pipe.

Ask for Price

At Metal Alloys Corporation we proudly manufacture MEDIFLOW BY METALCO marked Medical Grade Copper Pipes used in Medical Gas Distribution system. Uninterrupted Medical Gas supply is a necessity in hospitals (ICCU, Operation Theater, Wards, Nursery etc). Pipes facilitate this in most effective manner.

MEDIFLOW BY METALCO marked medical grade copper tubes are manufactured as per EN13348 / BS EN 1057 specifications. The pipes are manufactured under thorough inspections and quality control measures.

MEDIFLOW BY METALCO marked medical grade copper tubes are available in size range 10mm to 108mm OD, 0.6mm to 2.0mm wall thickness in Half Hard/Hard conditions and Length 3 meter as per requirement.

MEDIFLOW BY METALCO Pipes are subjected to Third Party Inspection agencies like Lloyds, SGS, TUV as per customer demand mandatory specifications and MEDIFLOW BY METALCO.

Equivalent Specifications

Particular		Standard			METALCO
CHEMICAL COMPOSITION		Copper (Cu) + Silver (Ag)		99.90%	Spectro Analysis done per heat as per standard tolerances.
CHEMICAL COMPOSITION		Phosphorous		0.015% to 0.04%	Spectro Analysis done per heat as per standard tolerances.
CARBON CONTENT TEST		Determining lubricant residue as total Carbon Content by measuring Carbon Dioxide Generated.			Tested with Combustion Method as per EN723:2009
CARBON CONTENT TEST					Tested with Combustion Method as per EN723:2009
TENSILE/ELONGATION TEST
Temper		Tensile Strength	Elongation	Hardness (Indicative)
As per EN1773	Common Term	MPa min.	A % min	HV 5
R220	annealed	220	40	(40 to 75)	Specifications maintained with help of In house testing facility.
R250	half hard	250	30	(75 to 100)
R290	hard	290	3	(min. 100)
DRIFTING TEST		Depending on Size and Temper Mandatory/Agreed Terms			Conical Mandrel @ 45º with tube end expanding 30º
FREE FROM DEFECT TEST		Eddy Current Test for detection of local defects			EDDY Current Test Conducted in accordance with EN1971
CLEANLINESS REQUIREMENT		Degreased, End Caps			Degreasing and End caps are fixed at both end of the pipe.

CATEGORY	ASTM	BS	EN	JIS	DIN	ISO	IS
Medical Grade Copper	ASTM B 819		EN 13348

En 13348 Medical Gas Copper Pipe

BS EN 1057 Medical Gas Copper Pipe

Astm B 819 Medical Gas Copper Pipe

Astm B 75 Medical Gas Copper Pipe

Medical Gas Copper Pipe Fittings

Coated Medical Copper Tube

Medical Gas Copper Pipe

Medical Gas Pipeline System