DZR brass eco brass hollow Bars

Alloy C352 Brass is a copper-zinc-lead alloy with a small addition of arsenic, having a mainly alpha phase structure in the “as used” heat treated condition, with a fine dispersion of lead particles. It has excellent machinability, good cold forming properties, with a high resistance to dezincification.

Typical Applications:

Valves, stopcocks, taps and other plumbing fitting coming in contact with chlorinated water supplies.

Equivalent Specifications

SPECIFICATIONS	DESIGNATION
UNS	C35330
BS	CZ 132
Europen	CW602N

Chemical Composition

	Cu	As	Pb	Zn
Min/Max	61.0 - 63.0	0.02-0.15	1.7 – 2.8	Rem

Physical Properties

Melting Point - Liquidus°F	1660
Melting Point - Solidus°F	1645
Densitylb/cu in. at 68°F	8.45
Specific Gravity	8.45
Electrical Conductivity% IACS at 68°F	26
Coefficient of Thermal Expansion 68-572 10⁻⁶Per °F (68-572 F)	12.4
Modulus of Elasticity in Tensionksi	15000

Sizes Available

HOLLOW RODS	Min Bore Size 20 mm and Max OD 100 mm
ROUND RODS/RODS	6mm To 130 mm
HEX	5mm To 60mm
SQUARE	4mm To 60mm
FLAT	5mm Min Thickness and max Width 120mm
PROFILES / SECTIONS	AS per Customer Drawing
BILLETS	Up to 200 mm
INGOTS	AS per Specification

Ask for Price

C27450 Lead Free Brass to not only aid in lead free compliance, but to optimize manufacturing efficiencies through productivity & complete recyclability.

Typical Applications:

Potable water components, fixtures & applications
PEX plumbing applications & systems
Forged products requiring lead free &/or dezincification compliance

Advantages:

Good machineability
Excellent ability to Thread Roll
Dezincification Resistant
Excellent forgeability
Excellent Brazing & Plating

Equivalent Specifications

SPECIFICATIONS	DESIGNATION
ISO	CuZn37
Europen	CW508L
BS	-
JIS	C27450
Russian	-

Chemical Composition

	Cu	Pb	Fe	Zn	Others
Min/Max	60-65	<0.25 (max)	0.35	Rem	<0.5
Nominals	63.00	-	-	37.00	-

Mechanical Properties

Rod H02	Tensile Strength (ksi)	Yield Strength (ksi)	Elongation (%)	Hardness (Rb
	58	40	30%	55-75

Fabrication Properties

Soldering	Excellent
Brazing	Excellent
Cold working	Excellent
Plating	Excellent
Forgability	95
Machinability	70

Sizes Available

WIRE	1mm To 8mm
HOLLOW RODS	Min Bore Size 20 mm and Max OD 100 mm
ROUND RODS/RODS	6mm To 130 mm
HEX	5mm To 60mm
SQUARE	4mm To 60mm
FLAT	5mm Min Thickness and max Width 120mm
PROFILES / SECTIONS	AS per Customer Drawing
BILLETS	Up to 200 mm
INGOTS	AS per Specification

Ask for Price

The Eco Brass of products carefully finds a balance between lead free compliance strategies and the prevailing necessity of remaining competitive and maintaining productivity. It has excellent machinability, good cold forming Properties, with a high resistance to dezincification.

Typical Applications:

Valves, stopcocks, taps and other plumbing fitting coming in contact with chlorinated water supplies.

Equivalent Specifications

SPECIFICATIONS	DESIGNATION
ISO	C69300
UNS	CuZn39Sn1
EN	CW724R
BS	CuZn21Si3P

Chemical Composition

	Cu	Zn	Pb	Si	P
Min/Max	73.0 – 76.0	Rem	0.09	2.7 – 3.4	0.04 – 0.10

Physical Properties

Density	8.25 kg/cm2
Tensile Strenght	670 Rm (N/mm2)
Thermal Conductivity	33 W/ (m K)
Electrical Conductivity	7.8 % IACS

Sizes Available

ROUND RODS	8mm To 100 mm
HEX	10mm To 100mm
SQUARE	10mm To 60mm
BILLETS	Up to 200 mm
INGOTS	As per Specification

Ask for Price

Excellent hot and cold workability; good forge ability. Fabricated by bending, coining, coppersmith, drawing and upsetting, hot forging and pressing, knurling, roll threading, shearing, spinning, swaging, and stamping.

Typical Applications:

Builders Hardware : Drawer Pulls, Hinges, Drawer Handles
Consumer : Bicycle Spoke Nipples, Clock and Watch Parts, Clock Plates and Nuts, Key Blanks
Fasteners : Nuts, Rivets, Screws
Industrial : tchets, Instrument Backs, Automatic Screw Machine Parts, Valve Stems, Pinions, Flare Fittings, Couplings,
Bearing Cages : Channel Plate, Wheels, Gears, Adapters
Other : Engravers Plate
Plumbing : Faucet Seats, Faucet Stems, Pipe Fittings, Plumbers Fittings, Plumbers' Brass Goods

Equivalent Specifications

SPECIFICATIONS	DESIGNATION
ISO	CuZn37Pb2
Europen	CuZn37Pb2
BS	Cz119

Chemical Composition

	Cu	Fe	Pb	Zn
Min/Max	60.0-63.0	.15	1.5-2.5	Rem.
Nominals	61.5	-	2.0	36.5

Physical Properties

Melting Point Liquid US	1670 F
Melting Point Solid US	1630 F
Specific Gravity	8.470
Coefficient of Thermal Expansion	11.30 10⁻⁶Per °F (68-572 F)
Density	0.306 lb/in3 at 68 F
Electrical Conductivity	26 %IACS @ 68 F
Electrical Resistivity	39.9 ohms-cmil/ft @ 68 F
Modulas of Elasticity in Tension	15000 ksi
Modulas of Rigidity	5600 ksi
Thermal Conductivity	67 BTU in/hr.ft².°F @ 68 F

Sizes Available

WIRE	1mm To 8mm
HOLLOW RODS	Min Bore Size 20 mm and Max OD 100 mm
ROUND RODS/RODS	6mm To 130 mm
HEX	5mm To 60mm
SQUARE	4mm To 60mm
FLAT	5mm Min Thickness and max Width 120mm
PROFILES / SECTIONS	AS per Customer Drawing
BILLETS	Up to 200 mm
INGOTS	AS per Specification

Ask for Price

Naval Brasses are nominally composed of 60% copper, 39.2% zinc and 0.8% tin. As are typical of brass alloys . Naval brasses have good strength and rigidity. By substituting tin for an equal quantity of zinc, a high corrosion resistance to seawater is achieved. The addition of tin also gives the C486 alloys an inherent resistance to dezincification, thereby further inhibiting the impingement by seawater at higher than normal temperatures. The alloys are also noted for its resistance to wear, fatigue, galling, and stress corrosion cracking.

Equivalent Specifications

SPECIFICATIONS	DESIGNATION
ISO	CuZn28Sn1
Europen	CuZn28Sn1As
BS	CZ 111
JIS	C 4430
Russian	L62-1

Chemical Composition

	Cu	As	Pb	Sn	Zn
Min/Max	59.0 - 62.0	0.02-0.25	1.0-2.5	0.30 - 1.5	Rem
Nominals	60.5	0.13	1.7	0.9	-

Physical Properties

Melting Point - Liquidus°F	1645
Melting Point - Solidus°F	1635
Densitylb/cu in. at 68°F	0.304
Specific Gravity	8.42
Electrical Conductivity% IACS at 68°F	25
Coefficient of Thermal Expansion 68-572 10⁻⁶Per °F (68-572 F)	13
Modulus of Elasticity in Tensionksi	14600

Sizes Available

HOLLOW RODS	Min Bore Size 20 mm and Max OD 100 mm
ROUND RODS/RODS	6mm To 130 mm
HEX	5mm To 60mm
SQUARE	4mm To 60mm
FLAT	5mm Min Thickness and max Width 120mm
PROFILES / SECTIONS	AS per Customer Drawing
BILLETS	Up to 200 mm
INGOTS	AS per Specification

Ask for Price

Alloy C352 Brass is a copper-zinc-lead alloy with a small addition of arsenic, having a mainly alpha phase structure in the “as used” heat treated condition, with a fine dispersion of lead particles. It has excellent machinability, good cold forming properties, with a high resistance to dezincification.

Typical Applications:
Valves, stopcocks, taps and other plumbing fitting coming in contact with chlorinated water supplies.

Equivalent Specifications

SPECIFICATIONS	DESIGNATION
UNS	C35330
BS	CZ 132
Europen	CW602N

Chemical Composition

	Cu	As	Pb	Zn
Min/Max	61.0 - 63.0	0.02-0.15	1.7 – 2.8	Rem

Physical Properties

Melting Point - Liquidus°F	1660
Melting Point - Solidus°F	1645
Densitylb/cu in. at 68°F	8.45
Specific Gravity	8.45
Electrical Conductivity% IACS at 68°F	26
Coefficient of Thermal Expansion 68-572 10⁻⁶Per °F (68-572 F)	12.4
Modulus of Elasticity in Tensionksi	15000 ksi

Sizes Available

HOLLOW RODS	Min Bore Size 20 mm and Max OD 100 mm
ROUND RODS/RODS	6mm To 130 mm
HEX	5mm To 60mm
SQUARE	4mm To 60mm
FLAT	5mm Min Thickness and max Width 120mm
PROFILES / SECTIONS	AS per Customer Drawing
BILLETS	Up to 200 mm
INGOTS	AS per Specification

Ask for Price

Naval Brasses are nominally composed of 60% copper, 39.2% zinc and 0.8% tin. As are typical of brass alloys . Naval brasses have good strength and rigidity. By substituting tin for an equal quantity of zinc, a high corrosion resistance to seawater is achieved. The addition of tin also gives the C486 alloys an inherent resistance to dezincification, thereby further inhibiting the impingement by seawater at higher than normal temperatures. The alloys are also noted for its resistance to wear, fatigue, galling, and stress corrosion cracking.

Equivalent Specifications

SPECIFICATIONS	DESIGNATION
ISO	CuZn28Sn1
Europen	CuZn28Sn1As
BS	CZ 111
JIS	C 4430
Russian	L62-1

Chemical Composition

	Cu	As	Pb	Sn	Zn
Min/Max	59.0 - 62.0	0.02-0.25	1.0-2.5	0.30 - 1.5	Rem
Nominals	60.5	0.13	1.7	0.9	-

Physical Properties

Melting Point - Liquidus°F	1645
Melting Point - Solidus°F	1635
Densitylb/cu in. at 68°F	0.304
Specific Gravity	8.42
Electrical Conductivity% IACS at 68°F	25
Coefficient of Thermal Expansion 68-572 10⁻⁶Per °F (68-572 F)	13
Modulus of Elasticity in Tensionksi	14600

Sizes Available

HOLLOW RODS	Min Bore Size 20 mm and Max OD 100 mm
ROUND RODS/RODS	6mm To 130 mm
HEX	5mm To 60mm
SQUARE	4mm To 60mm
FLAT	5mm Min Thickness and max Width 120mm
PROFILES / SECTIONS	AS per Customer Drawing
BILLETS	Up to 200 mm
INGOTS	AS per Specification

Ask for Price

The Eco Brass of products carefully finds a balance between lead free compliance strategies and the prevailing necessity of remaining competitive and maintaining productivity. It has excellent machinability, good cold forming Properties, with a high resistance to dezincification.

Typical Applications:

Valves, stopcocks, taps and other plumbing fitting coming in contact with chlorinated water supplies.

Equivalent Specifications

SPECIFICATIONS	DESIGNATION
UNS	C69300
EN	CW724R
BS	CuZn21Si3P

Chemical Composition

	Cu	Zn	Pb	Si	P
Min/Max	73.0 – 76.0	Rem	0.09	0.04 – 0.10

Physical Properties

Density	8.25 kg/cm2
Tensile Strenght	670 Rm (N/mm2)
Thermal Conductivity	33 W/ (m K)
Electrical Conductivity	7.8 % IACS

Sizes Available

ROUND RODS	8mm To 100 mm
HEX	10mm To 100mm
SQUARE	10mm To 60mm
FLAT	10mm Min Thickness and max Width 120mm
BILLETS	Up to 200 mm
INGOTS	AS per Specification

Ask for Price

The Eco Brass of products carefully finds a balance between lead free compliance strategies and the prevailing necessity of remaining competitive and maintaining productivity. It has excellent machinability, good cold forming Properties, with a high resistance to dezincification.

Typical Applications:

Valves, stopcocks, taps and other plumbing fitting coming in contact with chlorinated water supplies.

Equivalent Specifications

SPECIFICATIONS	DESIGNATION
UNS	C69300
EN	CW724R
BS	CuZn21Si3P

Chemical Composition

	Cu	Zn	Pb	Si	P
Min/Max	73.0 – 76.0	Rem	0.09	0.04 – 0.10

Physical Properties

Density	8.25 kg/cm2
Tensile Strenght	670 Rm (N/mm2)
Thermal Conductivity	33 W/ (m K)
Electrical Conductivity	7.8 % IACS

Sizes Available

ROUND RODS	8mm To 100 mm
HEX	10mm To 100mm
SQUARE	10mm To 60mm
FLAT	10mm Min Thickness and max Width 120mm
BILLETS	Up to 200 mm
INGOTS	AS per Specification

CATEGORY	ASTM	BS	EN	JIS	DIN	ISO	IS
Yellow Brass	C27451

CATEGORY	ASTM	BS	EN	JIS	DIN	ISO	IS
Dezincification Resistant Brass	C35330	CZ132	CW602N	2.0375		Cuzn36pb2As

CATEGORY	ASTM	BS	EN	JIS	DIN	ISO	IS
C48600	CZ111		C4430	2.0371	CuZn28Sn1

CW602N Dzr Brass Hollow Bars

C27450 Dzr Lead Free Brass Hollow Bars

C69300 Eco Brass Hollow Bars

C35330 Dzr Brass Hollow Bars

C48600 Brass Hollow Bars

Cz132 Dzr Brass Hollow Rods

Cz111 Brass Hollow Rods

Cw724r Dzr Eco Brass Hollow Rods

Cuzn21si3p Eco Brass Hollow Rods