Admiralty Brass Tubes

C44300 copper based alloy is ideal for heat exchanger tubes. Normally made to order to meet engineering requirements, you will find this alloy often times used in oil and gas applications that also require its non corrosive properties.

Typical Applications:

INDUSTRIAL: Evaporator Tubing, Heat Exchanger Tubing, Condenser Tube Plates, Distiller Tubes, Oil Well Pump Liner, Ferrules, Bourdon Tubes, Condenser Tubes

Equivalent Specifications

SPECIFICATIONS	DESIGNATION
ISO	CuZn28Sn1
Europen	CuZn28Sn1As
BS	CZ 111
JIS	C 4430
Russian	L62-1

Chemical Composition

	As	Cu	Fe	Pb	Sn	Zn
Min/Max	0.02 - 0.06	70.0 - 73.0	0.06	0.07	0.8 - 1.2	Rem
Nominals	0.0400	71.0000	-	-	1.0000	28.0000

Physical Properties

Coefficient of Thermal Expansion	11.2 10⁻⁶Per °F (68-572 F)
Density	0.308 lb/in3 @ 68 F
Electrical Conductivity	25 %IACS @ 68 F
Electrical Resistivity	41.5 ohms-cmil/ft @ 68 F
Melting Point Liquid US	1720 F
Melting Point Solid US	1650 F
Modulas of Elasticity in Tension	16000 ksi
Modulas of Rigidity	6000 ksi
Specific Gravity	8.53
Specific Heat Capacity	0.09 Btu/lb/°F @ 68 F
Thermal Conductivity	64.0 BTU in/hr.ft².°F @ 68°F

Sizes Available

HOLLOW RODS	Min Bore Size 20 mm and Max OD 100 mm
ROUND RODS/RODS	6mm To 130 mm
HEX	5mm To 60mm
SQUARE	4mm To 60mm
FLAT	5mm Min Thickness and max Width 120mm
PROFILES / SECTIONS	AS per Customer Drawing
BILLETS	Up to 200 mm
INGOTS	AS per Specification

Ask for Price

Asme Sb 111 Admiralty Brass Tubes is ideal for heat exchanger tubes. Normally made to order to meet engineering requirements, you will find this alloy often times used in oil and gas applications that also require its non corrosive properties.

Typical Applications:

INDUSTRIAL: Evaporator Tubing, Heat Exchanger Tubing, Condenser Tube Plates, Distiller Tubes, Oil Well Pump Liner, Ferrules, Bourdon Tubes, Condenser Tubes

Equivalent Specifications

SPECIFICATIONS	DESIGNATION
ISO	CuZn28Sn1
Europen	CuZn28Sn1As
BS	CZ 111
JIS	C 4430
Russian	L62-1

Chemical Composition

	As	Cu	Fe	Pb	Sn	Zn
Min/Max	0.02 - 0.06	70.0 - 73.0	0.06	0.07	0.8 - 1.2	Rem
Nominals	0.0400	71.0000	-	-	1.0000	28.0000

Physical Properties

Coefficient of Thermal Expansion	11.2 10⁻⁶Per °F (68-572 F)
Density	0.308 lb/in3 @ 68 F
Electrical Conductivity	25 %IACS @ 68 F
Electrical Resistivity	41.5 ohms-cmil/ft @ 68 F
Melting Point Liquid US	1720 F
Melting Point Solid US	1650 F
Modulas of Elasticity in Tension	16000 ksi
Modulas of Rigidity	6000 ksi
Specific Gravity	8.53
Specific Heat Capacity	0.09 Btu/lb/°F @ 68 F
Thermal Conductivity	64.0 BTU in/hr.ft².°F @ 68°F

Sizes Available

HOLLOW RODS	Min Bore Size 20 mm and Max OD 100 mm
ROUND RODS/RODS	6mm To 130 mm
HEX	5mm To 60mm
SQUARE	4mm To 60mm
FLAT	5mm Min Thickness and max Width 120mm
PROFILES / SECTIONS	AS per Customer Drawing
BILLETS	Up to 200 mm
INGOTS	AS per Specification

Astm B 111 C 44300 Admiralty Brass Tubes

Ask for Price

Astm B 111 C 44300 Admiralty Brass Tubes is ideal for heat exchanger tubes. Normally made to order to meet engineering requirements, you will find this alloy often times used in oil and gas applications that also require its non corrosive properties.

Typical Applications:

INDUSTRIAL: Evaporator Tubing, Heat Exchanger Tubing, Condenser Tube Plates, Distiller Tubes, Oil Well Pump Liner, Ferrules, Bourdon Tubes, Condenser Tubes

Equivalent Specifications

SPECIFICATIONS	DESIGNATION
ISO	CuZn28Sn1
Europen	CuZn28Sn1As
BS	CZ 111
JIS	C 4430
Russian	L62-1

Chemical Composition

	As	Cu	Fe	Pb	Sn	Zn
Min/Max	0.02 - 0.06	70.0 - 73.0	0.06	0.07	0.8 - 1.2	Rem
Nominals	0.0400	71.0000	-	-	1.0000	28.0000

Physical Properties

Coefficient of Thermal Expansion	11.2 10⁻⁶Per °F (68-572 F)
Density	0.308 lb/in3 @ 68 F
Electrical Conductivity	25 %IACS @ 68 F
Electrical Resistivity	41.5 ohms-cmil/ft @ 68 F
Melting Point Liquid US	1720 F
Melting Point Solid US	1650 F
Modulas of Elasticity in Tension	16000 ksi
Modulas of Rigidity	6000 ksi
Specific Gravity	8.53
Specific Heat Capacity	0.09 Btu/lb/°F @ 68 F
Thermal Conductivity	64.0 BTU in/hr.ft².°F @ 68°F

Sizes Available

HOLLOW RODS	Min Bore Size 20 mm and Max OD 100 mm
ROUND RODS/RODS	6mm To 130 mm
HEX	5mm To 60mm
SQUARE	4mm To 60mm
FLAT	5mm Min Thickness and max Width 120mm
PROFILES / SECTIONS	AS per Customer Drawing
BILLETS	Up to 200 mm
INGOTS	AS per Specification

Bs 2871 Part 3 Cz 111 Admiralty Brass Tubes

Ask for Price

Bs 2871 Part 3 Cz 111 Admiralty Brass Tubes is ideal for heat exchanger tubes. Normally made to order to meet engineering requirements, you will find this alloy often times used in oil and gas applications that also require its non corrosive properties.

Typical Applications:

INDUSTRIAL: Evaporator Tubing, Heat Exchanger Tubing, Condenser Tube Plates, Distiller Tubes, Oil Well Pump Liner, Ferrules, Bourdon Tubes, Condenser Tubes

Equivalent Specifications

SPECIFICATIONS	DESIGNATION
ISO	CuZn28Sn1
Europen	CuZn28Sn1As
BS	CZ 111
JIS	C 4430
Russian	L62-1

Chemical Composition

	As	Cu	Fe	Pb	Sn	Zn
Min/Max	0.02 - 0.06	70.0 - 73.0	0.06	0.07	0.8 - 1.2	Rem
Nominals	0.0400	71.0000	-	-	1.0000	28.0000

Physical Properties

Coefficient of Thermal Expansion	11.2 10⁻⁶Per °F (68-572 F)
Density	0.308 lb/in3 @ 68 F
Electrical Conductivity	25 %IACS @ 68 F
Electrical Resistivity	41.5 ohms-cmil/ft @ 68 F
Melting Point Liquid US	1720 F
Melting Point Solid US	1650 F
Modulas of Elasticity in Tension	16000 ksi
Modulas of Rigidity	6000 ksi
Specific Gravity	8.53
Specific Heat Capacity	0.09 Btu/lb/°F @ 68 F
Thermal Conductivity	64.0 BTU in/hr.ft².°F @ 68°F

Sizes Available

HOLLOW RODS	Min Bore Size 20 mm and Max OD 100 mm
ROUND RODS/RODS	6mm To 130 mm
HEX	5mm To 60mm
SQUARE	4mm To 60mm
FLAT	5mm Min Thickness and max Width 120mm
PROFILES / SECTIONS	AS per Customer Drawing
BILLETS	Up to 200 mm
INGOTS	AS per Specification

En 12451 Cuzn28 Sn1as Admiralty Brass Pipe

Ask for Price

En 12451 Cuzn28 Sn1as Admiralty Brass Pipe is ideal for heat exchanger tubes. Normally made to order to meet engineering requirements, you will find this alloy often times used in oil and gas applications that also require its non corrosive properties.

Typical Applications:

INDUSTRIAL: Evaporator Tubing, Heat Exchanger Tubing, Condenser Tube Plates, Distiller Tubes, Oil Well Pump Liner, Ferrules, Bourdon Tubes, Condenser Tubes

Equivalent Specifications

SPECIFICATIONS	DESIGNATION
ISO	CuZn28Sn1
Europen	CuZn28Sn1As
BS	CZ 111
JIS	C 4430
Russian	L62-1

Chemical Composition

	As	Cu	Fe	Pb	Sn	Zn
Min/Max	0.02 - 0.06	70.0 - 73.0	0.06	0.07	0.8 - 1.2	Rem
Nominals	0.0400	71.0000	-	-	1.0000	28.0000

Physical Properties

Coefficient of Thermal Expansion	11.2 10⁻⁶Per °F (68-572 F)
Density	0.308 lb/in3 @ 68 F
Electrical Conductivity	25 %IACS @ 68 F
Electrical Resistivity	41.5 ohms-cmil/ft @ 68 F
Melting Point Liquid US	1720 F
Melting Point Solid US	1650 F
Modulas of Elasticity in Tension	16000 ksi
Modulas of Rigidity	6000 ksi
Specific Gravity	8.53
Specific Heat Capacity	0.09 Btu/lb/°F @ 68 F
Thermal Conductivity	64.0 BTU in/hr.ft².°F @ 68°F

Sizes Available

HOLLOW RODS	Min Bore Size 20 mm and Max OD 100 mm
ROUND RODS/RODS	6mm To 130 mm
HEX	5mm To 60mm
SQUARE	4mm To 60mm
FLAT	5mm Min Thickness and max Width 120mm
PROFILES / SECTIONS	AS per Customer Drawing
BILLETS	Up to 200 mm
INGOTS	AS per Specification

Ask for Price

Nfa 51 102 Admiralty Brass Pipe is ideal for heat exchanger tubes. Normally made to order to meet engineering requirements, you will find this alloy often times used in oil and gas applications that also require its non corrosive properties.

Typical Applications:

INDUSTRIAL: Evaporator Tubing, Heat Exchanger Tubing, Condenser Tube Plates, Distiller Tubes, Oil Well Pump Liner, Ferrules, Bourdon Tubes, Condenser Tubes

Equivalent Specifications

SPECIFICATIONS	DESIGNATION
ISO	CuZn28Sn1
Europen	CuZn28Sn1As
BS	CZ 111
JIS	C 4430
Russian	L62-1

Chemical Composition

	As	Cu	Fe	Pb	Sn	Zn
Min/Max	0.02 - 0.06	70.0 - 73.0	0.06	0.07	0.8 - 1.2	Rem
Nominals	0.0400	71.0000	-	-	1.0000	28.0000

Physical Properties

Coefficient of Thermal Expansion	11.2 10⁻⁶Per °F (68-572 F)
Density	0.308 lb/in3 @ 68 F
Electrical Conductivity	25 %IACS @ 68 F
Electrical Resistivity	41.5 ohms-cmil/ft @ 68 F
Melting Point Liquid US	1720 F
Melting Point Solid US	1650 F
Modulas of Elasticity in Tension	16000 ksi
Modulas of Rigidity	6000 ksi
Specific Gravity	8.53
Specific Heat Capacity	0.09 Btu/lb/°F @ 68 F
Thermal Conductivity	64.0 BTU in/hr.ft².°F @ 68°F

Sizes Available

HOLLOW RODS	Min Bore Size 20 mm and Max OD 100 mm
ROUND RODS/RODS	6mm To 130 mm
HEX	5mm To 60mm
SQUARE	4mm To 60mm
FLAT	5mm Min Thickness and max Width 120mm
PROFILES / SECTIONS	AS per Customer Drawing
BILLETS	Up to 200 mm
INGOTS	AS per Specification

Ask for Price

Cuzn29sn1 Admiralty Brass Pipe is ideal for heat exchanger tubes. Normally made to order to meet engineering requirements, you will find this alloy often times used in oil and gas applications that also require its non corrosive properties.

Typical Applications:

INDUSTRIAL: Evaporator Tubing, Heat Exchanger Tubing, Condenser Tube Plates, Distiller Tubes, Oil Well Pump Liner, Ferrules, Bourdon Tubes, Condenser Tubes

Equivalent Specifications

SPECIFICATIONS	DESIGNATION
ISO	CuZn28Sn1
Europen	CuZn28Sn1As
BS	CZ 111
JIS	C 4430
Russian	L62-1

Chemical Composition

	As	Cu	Fe	Pb	Sn	Zn
Min/Max	0.02 - 0.06	70.0 - 73.0	0.06	0.07	0.8 - 1.2	Rem
Nominals	0.0400	71.0000	-	-	1.0000	28.0000

Physical Properties

Coefficient of Thermal Expansion	11.2 10⁻⁶Per °F (68-572 F)
Density	0.308 lb/in3 @ 68 F
Electrical Conductivity	25 %IACS @ 68 F
Electrical Resistivity	41.5 ohms-cmil/ft @ 68 F
Melting Point Liquid US	1720 F
Melting Point Solid US	1650 F
Modulas of Elasticity in Tension	16000 ksi
Modulas of Rigidity	6000 ksi
Specific Gravity	8.53
Specific Heat Capacity	0.09 Btu/lb/°F @ 68 F
Thermal Conductivity	64.0 BTU in/hr.ft².°F @ 68°F

Sizes Available

HOLLOW RODS	Min Bore Size 20 mm and Max OD 100 mm
ROUND RODS/RODS	6mm To 130 mm
HEX	5mm To 60mm
SQUARE	4mm To 60mm
FLAT	5mm Min Thickness and max Width 120mm
PROFILES / SECTIONS	AS per Customer Drawing
BILLETS	Up to 200 mm
INGOTS	AS per Specification

Ask for Price

Jis H 3300 C 4430 Admiralty Brass Pipe based alloy is ideal for heat exchanger tubes. Normally made to order to meet engineering requirements, you will find this alloy often times used in oil and gas applications that also require its non corrosive properties.

Typical Applications:

INDUSTRIAL: Evaporator Tubing, Heat Exchanger Tubing, Condenser Tube Plates, Distiller Tubes, Oil Well Pump Liner, Ferrules, Bourdon Tubes, Condenser Tubes

Equivalent Specifications

SPECIFICATIONS	DESIGNATION
ISO	CuZn28Sn1
Europen	CuZn28Sn1As
BS	CZ 111
JIS	C 4430
Russian	L62-1

Chemical Composition

	As	Cu	Fe	Pb	Sn	Zn
Min/Max	0.02 - 0.06	70.0 - 73.0	0.06	0.07	0.8 - 1.2	Rem
Nominals	0.0400	71.0000	-	-	1.0000	28.0000

Physical Properties

Coefficient of Thermal Expansion	11.2 10⁻⁶Per °F (68-572 F)
Density	0.308 lb/in3 @ 68 F
Electrical Conductivity	25 %IACS @ 68 F
Electrical Resistivity	41.5 ohms-cmil/ft @ 68 F
Melting Point Liquid US	1720 F
Melting Point Solid US	1650 F
Modulas of Elasticity in Tension	16000 ksi
Modulas of Rigidity	6000 ksi
Specific Gravity	8.53
Specific Heat Capacity	0.09 Btu/lb/°F @ 68 F
Thermal Conductivity	64.0 BTU in/hr.ft².°F @ 68°F

Sizes Available

HOLLOW RODS	Min Bore Size 20 mm and Max OD 100 mm
ROUND RODS/RODS	6mm To 130 mm
HEX	5mm To 60mm
SQUARE	4mm To 60mm
FLAT	5mm Min Thickness and max Width 120mm
PROFILES / SECTIONS	AS per Customer Drawing
BILLETS	Up to 200 mm
INGOTS	AS per Specification

CATEGORY	ASTM	BS	EN	JIS	DIN	ISO	IS
Admiralty Brass	C44300	CZ111	CW706R	H3100(92) C4430 P/R	2.047	CuZn28Sn1	IS 1545 Cuzn29Sn1As

C44300 Admiralty Brass Tubes

Asme Sb 111 Admiralty Brass Tubes

Astm B 111 C 44300 Admiralty Brass Tubes

Bs 2871 Part 3 Cz 111 Admiralty Brass Tubes

En 12451 Cuzn28 Sn1as Admiralty Brass Pipe

Nfa 51 102 Admiralty Brass Pipe

Cuzn29sn1 Admiralty Brass Pipe

Jis H 3300 C 4430 Admiralty Brass Pipe