Copper Pipe

High electrical and thermal conductivity, good corrosion resistance and solderability. C11000 is used for welding fixtures, anodes, bus bar in electrical power installations, ground straps, commutators and current carrying hardware. Its inherent fabrication qualities readily permit it to be bent, soldered, drilled, peened, riveted and formed to fit almost any design specification.

Equivalent Specifications

SPECIFICATIONS	DESIGNATION
ISO	Cu-ETP
Europen	Cu-ETP
BS	Cu-ETP-2
JIS	C-1100
Russian	MO

Chemical Composition

	Cu	0
Min/Max	99.90 min	-
Nominals	-	0.0400

Physical Properties

Coefficient of Thermal Expansion	9.4 10⁻⁶Per °F (68-212 F) 9.6 10⁻⁶Per °F (68-392 F) 9.8 10⁻⁶Per °F (68-572 F)
Density	0.322 lb/in3 @ 68 F
Electrical Conductivity	101%IACS @ 68 F
Electrical Resistivity	10.3 ohms-cmil/ft @ 68 F
Melting Point Liquid US	1981 F
Melting Point Solid US	1949 F
Modulas of Elasticity in Tension	17000 ksi
Modulas of Rigidity	6400 ksi
Specific Gravity	8.91
Specific Heat Capacity	0.092 Btu/lb/°F @ 68 F
Thermal Conductivity	226.0 BTU in/hr.ft².°F @ 68 F

Sizes Available

HOLLOW RODS	Min Bore Size 20 mm and Max OD 100 mm
ROUND RODS/RODS	8mm To 100 mm
HEX	10mm To 60mm
SQUARE	10mm To 60mm
FLAT	10mm Min Thickness and max Width 120mm
BILLETS	Up to 200 mm
INGOTS	AS per Specification

Ask for Price

High electrical and thermal conductivity, good corrosion resistance and solderability. C11000 is used for welding fixtures, anodes, bus bar in electrical power installations, ground straps, commutators and current carrying hardware. Its inherent fabrication qualities readily permit it to be bent, soldered, drilled, peened, riveted and formed to fit almost any design specification.

Equivalent Specifications

SPECIFICATIONS	DESIGNATION
ISO	Cu-ETP
Europen	Cu-ETP
BS	Cu-ETP-2
JIS	C-1100
Russian	MO

Chemical Composition

	Cu	0
Min/Max	99.90 min	-
Nominals	-	0.0400

Physical Properties

Coefficient of Thermal Expansion	9.4 10⁻⁶Per °F (68-212 F) 9.6 10⁻⁶Per °F (68-392 F) 9.8 10⁻⁶Per °F (68-572 F)
Density	0.322 lb/in3 @ 68 F
Electrical Conductivity	101%IACS @ 68 F
Electrical Resistivity	10.3 ohms-cmil/ft @ 68 F
Melting Point Liquid US	1981 F
Melting Point Solid US	1949 F
Modulas of Elasticity in Tension	17000 ksi
Modulas of Rigidity	6400 ksi
Specific Gravity	8.91
Specific Heat Capacity	0.092 Btu/lb/°F @ 68 F
Thermal Conductivity	226.0 BTU in/hr.ft².°F @ 68 F

Sizes Available

HOLLOW RODS	Min Bore Size 20 mm and Max OD 100 mm
ROUND RODS/RODS	8mm To 100 mm
HEX	10mm To 60mm
SQUARE	10mm To 60mm
FLAT	10mm Min Thickness and max Width 120mm
BILLETS	Up to 200 mm
INGOTS	AS per Specification

Ask for Price

High electrical and thermal conductivity, good corrosion resistance and solderability. C11000 is used for welding fixtures, anodes, bus bar in electrical power installations, ground straps, commutators and current carrying hardware. Its inherent fabrication qualities readily permit it to be bent, soldered, drilled, peened, riveted and formed to fit almost any design specification.

Equivalent Specifications

SPECIFICATIONS	DESIGNATION
ISO	Cu-ETP
Europen	Cu-ETP
BS	Cu-ETP-2
JIS	C-1100
Russian	MO

Chemical Composition

	Cu	0
Min/Max	99.90 min	-
Nominals	-	0.0400

Physical Properties

Coefficient of Thermal Expansion	9.4 10⁻⁶Per °F (68-212 F) 9.6 10⁻⁶Per °F (68-392 F) 9.8 10⁻⁶Per °F (68-572 F)
Density	0.322 lb/in3 @ 68 F
Electrical Conductivity	101%IACS @ 68 F
Electrical Resistivity	10.3 ohms-cmil/ft @ 68 F
Melting Point Liquid US	1981 F
Melting Point Solid US	1949 F
Modulas of Elasticity in Tension	17000 ksi
Modulas of Rigidity	6400 ksi
Specific Gravity	8.91
Specific Heat Capacity	0.092 Btu/lb/°F @ 68 F
Thermal Conductivity	226.0 BTU in/hr.ft².°F @ 68 F

Sizes Available

HOLLOW RODS	Min Bore Size 20 mm and Max OD 100 mm
ROUND RODS/RODS	8mm To 100 mm
HEX	10mm To 60mm
SQUARE	10mm To 60mm
FLAT	10mm Min Thickness and max Width 120mm
BILLETS	Up to 200 mm
INGOTS	AS per Specification

Ask for Price

High electrical and thermal conductivity, good corrosion resistance and solderability. C11000 is used for welding fixtures, anodes, bus bar in electrical power installations, ground straps, commutators and current carrying hardware. Its inherent fabrication qualities readily permit it to be bent, soldered, drilled, peened, riveted and formed to fit almost any design specification.

Equivalent Specifications

SPECIFICATIONS	DESIGNATION
ISO	Cu-ETP
Europen	Cu-ETP
BS	Cu-ETP-2
JIS	C-1100
Russian	MO

Chemical Composition

	Cu	0
Min/Max	99.90 min	-
Nominals	-	0.0400

Physical Properties

Coefficient of Thermal Expansion	9.4 10⁻⁶Per °F (68-212 F) 9.6 10⁻⁶Per °F (68-392 F) 9.8 10⁻⁶Per °F (68-572 F)
Density	0.322 lb/in3 @ 68 F
Electrical Conductivity	101%IACS @ 68 F
Electrical Resistivity	10.3 ohms-cmil/ft @ 68 F
Melting Point Liquid US	1981 F
Melting Point Solid US	1949 F
Modulas of Elasticity in Tension	17000 ksi
Modulas of Rigidity	6400 ksi
Specific Gravity	8.91
Specific Heat Capacity	0.092 Btu/lb/°F @ 68 F
Thermal Conductivity	226.0 BTU in/hr.ft².°F @ 68 F

Sizes Available

HOLLOW RODS	Min Bore Size 20 mm and Max OD 100 mm
ROUND RODS/RODS	8mm To 100 mm
HEX	10mm To 60mm
SQUARE	10mm To 60mm
FLAT	10mm Min Thickness and max Width 120mm
BILLETS	Up to 200 mm
INGOTS	AS per Specification

Ask for Price

High electrical and thermal conductivity, good corrosion resistance and solderability. C11000 is used for welding fixtures, anodes, bus bar in electrical power installations, ground straps, commutators and current carrying hardware. Its inherent fabrication qualities readily permit it to be bent, soldered, drilled, peened, riveted and formed to fit almost any design specification.

Equivalent Specifications

SPECIFICATIONS	DESIGNATION
ISO	Cu-ETP
Europen	Cu-ETP
BS	Cu-ETP-2
JIS	C-1100
Russian	MO

Chemical Composition

	Cu	0
Min/Max	99.90 min	-
Nominals	-	0.0400

Physical Properties

Coefficient of Thermal Expansion	9.4 10⁻⁶Per °F (68-212 F) 9.6 10⁻⁶Per °F (68-392 F) 9.8 10⁻⁶Per °F (68-572 F)
Density	0.322 lb/in3 @ 68 F
Electrical Conductivity	101%IACS @ 68 F
Electrical Resistivity	10.3 ohms-cmil/ft @ 68 F
Melting Point Liquid US	1981 F
Melting Point Solid US	1949 F
Modulas of Elasticity in Tension	17000 ksi
Modulas of Rigidity	6400 ksi
Specific Gravity	8.91
Specific Heat Capacity	0.092 Btu/lb/°F @ 68 F
Thermal Conductivity	226.0 BTU in/hr.ft².°F @ 68 F

Sizes Available

HOLLOW RODS	Min Bore Size 20 mm and Max OD 100 mm
ROUND RODS/RODS	8mm To 100 mm
HEX	10mm To 60mm
SQUARE	10mm To 60mm
FLAT	10mm Min Thickness and max Width 120mm
BILLETS	Up to 200 mm
INGOTS	AS per Specification

Ask for Price

High electrical and thermal conductivity, good corrosion resistance and solderability. C11000 is used for welding fixtures, anodes, bus bar in electrical power installations, ground straps, commutators and current carrying hardware. Its inherent fabrication qualities readily permit it to be bent, soldered, drilled, peened, riveted and formed to fit almost any design specification.

Equivalent Specifications

SPECIFICATIONS	DESIGNATION
ISO	Cu-ETP
Europen	Cu-ETP
BS	Cu-ETP-2
JIS	C-1100
Russian	MO

Chemical Composition

	Cu	0
Min/Max	99.90 min	-
Nominals	-	0.0400

Physical Properties

Coefficient of Thermal Expansion	9.4 10⁻⁶Per °F (68-212 F) 9.6 10⁻⁶Per °F (68-392 F) 9.8 10⁻⁶Per °F (68-572 F)
Density	0.322 lb/in3 @ 68 F
Electrical Conductivity	101%IACS @ 68 F
Electrical Resistivity	10.3 ohms-cmil/ft @ 68 F
Melting Point Liquid US	1981 F
Melting Point Solid US	1949 F
Modulas of Elasticity in Tension	17000 ksi
Modulas of Rigidity	6400 ksi
Specific Gravity	8.91
Specific Heat Capacity	0.092 Btu/lb/°F @ 68 F
Thermal Conductivity	226.0 BTU in/hr.ft².°F @ 68 F

Sizes Available

HOLLOW RODS	Min Bore Size 20 mm and Max OD 100 mm
ROUND RODS/RODS	8mm To 100 mm
HEX	10mm To 60mm
SQUARE	10mm To 60mm
FLAT	10mm Min Thickness and max Width 120mm
BILLETS	Up to 200 mm
INGOTS	AS per Specification

Ask for Price

High electrical and thermal conductivity, good corrosion resistance and solderability. C11000 is used for welding fixtures, anodes, bus bar in electrical power installations, ground straps, commutators and current carrying hardware. Its inherent fabrication qualities readily permit it to be bent, soldered, drilled, peened, riveted and formed to fit almost any design specification.

Equivalent Specifications

SPECIFICATIONS	DESIGNATION
ISO	Cu-ETP
Europen	Cu-ETP
BS	Cu-ETP-2
JIS	C-1100
Russian	MO

Chemical Composition

	Cu	0
Min/Max	99.90 min	-
Nominals	-	0.0400

Physical Properties

Coefficient of Thermal Expansion	9.4 10⁻⁶Per °F (68-212 F) 9.6 10⁻⁶Per °F (68-392 F) 9.8 10⁻⁶Per °F (68-572 F)
Density	0.322 lb/in3 @ 68 F
Electrical Conductivity	101%IACS @ 68 F
Electrical Resistivity	10.3 ohms-cmil/ft @ 68 F
Melting Point Liquid US	1981 F
Melting Point Solid US	1949 F
Modulas of Elasticity in Tension	17000 ksi
Modulas of Rigidity	6400 ksi
Specific Gravity	8.91
Specific Heat Capacity	0.092 Btu/lb/°F @ 68 F
Thermal Conductivity	226.0 BTU in/hr.ft².°F @ 68 F

Sizes Available

HOLLOW RODS	Min Bore Size 20 mm and Max OD 100 mm
ROUND RODS/RODS	8mm To 100 mm
HEX	10mm To 60mm
SQUARE	10mm To 60mm
FLAT	10mm Min Thickness and max Width 120mm
BILLETS	Up to 200 mm
INGOTS	AS per Specification

Ask for Price

High electrical and thermal conductivity, good corrosion resistance and solderability. C11000 is used for welding fixtures, anodes, bus bar in electrical power installations, ground straps, commutators and current carrying hardware. Its inherent fabrication qualities readily permit it to be bent, soldered, drilled, peened, riveted and formed to fit almost any design specification.

Equivalent Specifications

SPECIFICATIONS	DESIGNATION
ISO	Cu-ETP
Europen	Cu-ETP
BS	Cu-ETP-2
JIS	C-1100
Russian	MO

Chemical Composition

	Cu	0
Min/Max	99.90 min	-
Nominals	-	0.0400

Physical Properties

Coefficient of Thermal Expansion	9.4 10⁻⁶Per °F (68-212 F) 9.6 10⁻⁶Per °F (68-392 F) 9.8 10⁻⁶Per °F (68-572 F)
Density	0.322 lb/in3 @ 68 F
Electrical Conductivity	101%IACS @ 68 F
Electrical Resistivity	10.3 ohms-cmil/ft @ 68 F
Melting Point Liquid US	1981 F
Melting Point Solid US	1949 F
Modulas of Elasticity in Tension	17000 ksi
Modulas of Rigidity	6400 ksi
Specific Gravity	8.91
Specific Heat Capacity	0.092 Btu/lb/°F @ 68 F
Thermal Conductivity	226.0 BTU in/hr.ft².°F @ 68 F

Sizes Available

HOLLOW RODS	Min Bore Size 20 mm and Max OD 100 mm
ROUND RODS/RODS	8mm To 100 mm
HEX	10mm To 60mm
SQUARE	10mm To 60mm
FLAT	10mm Min Thickness and max Width 120mm
BILLETS	Up to 200 mm
INGOTS	AS per Specification

CATEGORY	ASTM	BS	EN	JIS	DIN	ISO	IS
Beryllium Chromium Copper
Electrolytic Tough Pitch (ETP)	C11000	C101	CW004A	H3250(92)-C1100 BE	2.006	R1337-CuETP	IS 191 CuETP\ IS 6912 ETP
Copper Chromium Nickel Silicon	C18000	DTD498	CW111C		2.0855	CuNi2Si
Copper Chromium Zirconium	C18150	CC102	CW106C		2.1293	CuCr1Zr	IS 8365 CuCrZr
Chromium Copper	C18200	CC101	CW105C		2.1291	1640-CuCr1	IS 8365 CuCr

C11000 Etp Copper Pipe

C101 Etp Copper Pipe

Round Etp Copper Pipe

Electrolytic Touch Pitch Copper Tube

Cu-Etp Copper Tubes

Cu-Etp Cw004a Copper Tubes

Astm Sb 111 C11000 Seamless Copper Pipe

Astm B152 C10100 Etp Copper Pipe